Dongguan Vasin Adhesive Products Co., LTD
Printable Reflective Film is made of reflective material that can be laser cut in different logo then heat press on the clothing,shoes,hats,bags,gloves etc.The reflective logo shows high reflective,clearness,resistance after heat press on the garments.
1. Reflective Heat transfer flim has glass beads layer on top and the surface of it is protected by an adhesive PET carrier.
2. This film can do laser cutting according to your logo,then hot press on sport wear, shoes,traffic safe garment etc.
3. The heat Transferable film suitable for laser cutting, computer cutting and die-cutting.
4. Work on a flat surface where garment heat and pressure can be applied. Do not heat transfer over seams and stitches.
White, Silver, Rainbow
|Material||Printable Reflective Heat Transfer Film|
1. Good Folding endurance material
2. Gan print any color logo with good performance
3. Good release effect, will not leave folds on the fabric
4. Heat transfer temperature: 130-150 °C
Dwell Times: 10-20Seconds
5. Washing Cycles: 25 times
|Washing Chemistry noticed|| |
Lower PH(nearer to neutral) and lower active alkallnity will increase the lifetime performance of the retroreflective material.
Do not use solvenated surfactants.
Do not use Chlorine or perborate bleach.
Low to medium alkaline, high surfactant detergents are preferred.
|Delivery Time||7-10 working days|
|Payment Method||T/T, Western Union,L/C|
|Package||1m x 100M/Roll or custom smaller size|
|Usage|| For white film, allow to print some colors logo on the Reflective Film, |
For silver film, just silver logo is allow.
After logo printed, it can heat transfer on clothing, bags, gloves and so on.